Warning: main(/www/www/htdocs/style/globals.php) [function.main]: failed to open stream: No such file or directory in /www/www/docs/6.4.1/neutrino/audio/libs/snd_pcm_channel_info_t.html on line 1
Warning: main() [function.include]: Failed opening '/www/www/htdocs/style/globals.php' for inclusion (include_path='.:/www/www/common:/www/www/php/lib/php') in /www/www/docs/6.4.1/neutrino/audio/libs/snd_pcm_channel_info_t.html on line 1
Warning: main(/www/www/htdocs/style/header.php) [function.main]: failed to open stream: No such file or directory in /www/www/docs/6.4.1/neutrino/audio/libs/snd_pcm_channel_info_t.html on line 8
Warning: main() [function.include]: Failed opening '/www/www/htdocs/style/header.php' for inclusion (include_path='.:/www/www/common:/www/www/php/lib/php') in /www/www/docs/6.4.1/neutrino/audio/libs/snd_pcm_channel_info_t.html on line 8
Information structure for a PCM channel
typedef struct snd_pcm_channel_info
{
int32_t subdevice;
int8_t subname[36];
int32_t channel;
int32_t zero1;
int32_t zero2[4];
uint32_t flags;
uint32_t formats;
uint32_t rates;
int32_t min_rate;
int32_t max_rate;
int32_t min_voices;
int32_t max_voices;
int32_t max_buffer_size;
int32_t min_fragment_size;
int32_t max_fragment_size;
int32_t fragment_align;
int32_t fifo_size;
int32_t transfer_block_size;
uint8_t zero3[4];
snd_pcm_digital_t dig_mask;
uint32_t zero4;
int32_t mixer_device;
snd_mixer_eid_t mixer_eid;
snd_mixer_gid_t mixer_gid;
uint8_t reserved[128];
} snd_pcm_channel_info_t;
The snd_pcm_channel_info_t structure describes PCM
channel information.
The members include:
- subdevice
- The subdevice number.
- subname[32]
- The subdevice name.
- channel
- The channel direction; either SND_PCM_CHANNEL_CAPTURE or
SND_PCM_CHANNEL_PLAYBACK.
- flags
- Any combination of:
- SND_PCM_CHNINFO_BLOCK — the hardware supports
block mode.
- SND_PCM_CHNINFO_BLOCK_TRANSFER — the
hardware transfers samples by chunks (for example PCI burst transfers).
- SND_PCM_CHNINFO_INTERLEAVE — the
hardware accepts audio data composed of interleaved samples.
- SND_PCM_CHNINFO_MMAP — the hardware supports
mmap access.
- SND_PCM_CHNINFO_MMAP_VALID — fragment samples are
valid during transfer.
This means that the fragment samples may be used when the io
member from the mmap control structure
snd_pcm_mmap_control_t is set (the fragment is being
transferred).
- SND_PCM_CHNINFO_NONINTERLEAVE — the
hardware accepts audio data composed of noninterleaved samples.
- SND_PCM_CHNINFO_OVERRANGE — the
hardware supports ADC (capture) overrange detection.
- SND_PCM_CHNINFO_PAUSE — the
hardware supports pausing of the DMA engines (playback only).
|
Note that the absence of this flag does not preclude the
synthesis of an application-level pause.
It refers only to the direct capabilities of the hardware.
Support for this flag is extremely rare, so dependence on it is
discouraged.
|
- formats
- The supported formats (SND_PCM_FMT_*).
- rates
- Hardware rates (SND_PCM_RATE_*).
- min_rate
- The minimum rate (in Hz).
- max_rate
- The maximum rate (in Hz).
- min_voices
- The minimum number of voices (probably always 1).
- max_voices
- The maximum number of voices.
- max_buffer_size
- The maximum buffer size, in bytes.
- min_fragment_size
- The minimum fragment size, in bytes.
- max_fragment_size
- The maximum fragment size, in bytes.
- fragment_align
- If this value is set, the size of the buffer fragments must be a multiple
of this value, so that they are in the proper alignment.
- fifo_size
- The stream FIFO size, in bytes.
Deprecated; don't use this member.
- transfer_block_size
- The bus transfer block size in bytes.
- dig_mask
- Not currently implemented.
- mixer_device
- The mixer device for this channel.
- mixer_eid
- A
snd_mixer_eid_t
structure that describes the mixer element identification for this channel.
- mixer_gid
- The mixer group identification for this channel; see
snd_mixer_gid_t.
You should use this mixer group in applications that are implementing
their own volume controls.
This mixer group is guaranteed to be the lowest-level mixer group for your
channel (or subchannel), as determined at the time that you call
snd_ctl_pcm_channel_info().
If you call this function after the channel has been configured, and a
subchannel has been allocated (i.e. after calling
snd_pcm_channel_params()),
this mixer group is the subchannel mixer group that's specific to
the application's current subchannel.
QNX Neutrino
snd_ctl_pcm_channel_info(),
snd_mixer_eid_t,
snd_mixer_gid_t,
snd_pcm_channel_info(),
snd_pcm_plugin_info()
Warning: main(/www/www/htdocs/style/footer.php) [function.main]: failed to open stream: No such file or directory in /www/www/docs/6.4.1/neutrino/audio/libs/snd_pcm_channel_info_t.html on line 268
Warning: main() [function.include]: Failed opening '/www/www/htdocs/style/footer.php' for inclusion (include_path='.:/www/www/common:/www/www/php/lib/php') in /www/www/docs/6.4.1/neutrino/audio/libs/snd_pcm_channel_info_t.html on line 268