Warning: main(/www/www/htdocs/style/globals.php) [function.main]: failed to open stream: No such file or directory in /www/www/docs/6.4.1/neutrino/utilities/d/devnp-bcm43xx.so.html on line 1

Warning: main() [function.include]: Failed opening '/www/www/htdocs/style/globals.php' for inclusion (include_path='.:/www/www/common:/www/www/php/lib/php') in /www/www/docs/6.4.1/neutrino/utilities/d/devnp-bcm43xx.so.html on line 1

Warning: main(/www/www/htdocs/style/header.php) [function.main]: failed to open stream: No such file or directory in /www/www/docs/6.4.1/neutrino/utilities/d/devnp-bcm43xx.so.html on line 8

Warning: main() [function.include]: Failed opening '/www/www/htdocs/style/header.php' for inclusion (include_path='.:/www/www/common:/www/www/php/lib/php') in /www/www/docs/6.4.1/neutrino/utilities/d/devnp-bcm43xx.so.html on line 8

devnp-bcm43xx.so

Driver for the Broadcom-based 43xx 802.11b/g wireless Ethernet controller

Syntax:

io-pkt-variant -d bcm43xx [option[,option ...]] ... &

where variant is one of v4, v4-hc, or v6-hc.

Runs on:

Neutrino

Options:


Note: Use commas (,), not spaces, to separate the options.

irq=num
The IRQ of the interface. It's automatically detected by default.
mac=XXXXXXXXXXXX
The MAC address of controller. The default is automatically detected on supported hardware.
pio
Run the driver in PIO mode; the default is bus master.
verbose
verbose=num
Be verbose. Specify num for more verbosity (num can be 1-4, the higher the number, the more detailed the output). The output goes to slogger; invoke sloginfo to view it.

Description:

The devnp-bcm43xx.so driver controls the Broadcom-based 802.11b/g wireless Ethernet controller. This is a native io-pkt driver; its interface names are in the form bcmX, where X is an integer.

The devnp-bcm43xx.so driver is fully integrated with the 802.11 layer in the stack. It supports both infrastructure client and access point modes of operation. For further information, see ifconfig, wpa_supplicant, and hostapd.

Some devices support hardware checksums, although some might do so in only one direction; to determine if your device does, type:

ifconfig bcmX

and look for the following in the list of supported options:

You can then use ifconfig to enable or disable whichever of these options your device supports.

Examples:

Start the v6 variant of io-pkt using the Broadcom 43xx driver:

io-pkt-v6-hc -d bcm43xx

See also:

devn-*, devnp-*, hostapd, ifconfig, io-pkt, wpa_supplicant


Warning: main(/www/www/htdocs/style/footer.php) [function.main]: failed to open stream: No such file or directory in /www/www/docs/6.4.1/neutrino/utilities/d/devnp-bcm43xx.so.html on line 167

Warning: main() [function.include]: Failed opening '/www/www/htdocs/style/footer.php' for inclusion (include_path='.:/www/www/common:/www/www/php/lib/php') in /www/www/docs/6.4.1/neutrino/utilities/d/devnp-bcm43xx.so.html on line 167